Working
materials

We select only materials in full accordance with the requirements of either AWI’s or WI's quality standard for each type of woodwork and quality grade specified. Today, EVERO Joinery deals with two main types of wood:

Solid wood - Softwood

We carefully make sure not to use any damaged, rotten or discoloured wood
Discoloured sapwood, exposed pith, unsound, dead and loose knots shall not be present on any visible face
Moisture content is maintained at appropriate levels

Using only elements cut from quarter-sawn wood
Wood shall be graded and stamped “Dry” / “KD” and have a moisture content of 16% or less

Solid wood – Hardwood

Using only hardwoods fully compliant with the sustainability criteria stipulated in general requirements
Unsound, dead, and loose knots shall not be present on any visible face, nor any resin pockets
Neither discoloured sapwood, nor exposed pith is acceptable

Moisture content is maintained at appropriate levels
All elements shall be cut from quarter-sawn wood

Artificial wood

Recycled Content of Medium-Density Fibreboard and Particleboard: post-consumer recycled content, plus ½ of pre-consumer recycled content, not less than 100%
Hardboard: in accordance with American Hardboard Association (AHA) ANSI/ AHA A135.4
Medium-Density Fibreboard: ANSI A208.2, Grade 130 made with a binder containing no urea formaldehyde
Particleboard: ANSI A208.1, Grade M-2 made with a binder containing no urea formaldehyde
Particleboard: straw-based particleboard in accordance with the requirements in ANSI A208.1, Grade M-2, except for density
Softwood Plywood: in accordance with U.S. Department of Commerce (DOC) PS 1 Medium Density Overlay

Thermoset Decorative Panels: Particleboard or medium-density fibreboard finished with thermally fused, melamine-impregnated decorative paper in accordance with LMA SAT-1
High-Pressure Decorative Laminate: NEMA LD 3, grades as indicated or, if not indicated, as required by woodwork quality standard
Fire-Retardant Fibreboard: Medium-density fibreboard panels in accordance with ANSI A208.2, made from softwood fibres, synthetic resins, and fire-retardant chemicals mixed at the time of the panel manufacture to achieve a flame-spread index of 25 or less and smoke-developed index of 200 or less in accordance with ASTM E84

Veneer

We dispose of all the species required whenever a customer request for any certain finish.

Metal

We dispose of almost all types of steel associated with any design requirement or structural requirement to build joinery or furniture in a sheet format or customizable shapes.

Marble, granite,
stone

Depending on design specifications, we use all types of marble and granite to build your kitchen / countertop or furniture associated with marble finishes in all ranges.

Porcelain

Offers an exceptional stylistic appeal to a surface or space. The highly recognized material, comes in a wide range of patterns and textures to choose from.

Corian and
Quartz

All the options of solid surfaces to be used in many creative ways, associated with EVERO Joinery products.